Sterling / Home types / New homes
A new construction smart home Monroe GA families move into should work on day one. We plan the technology from your drawings, prewire before drywall, finish and program at trim, and stay with you after move-in. Every new construction smart home Monroe GA project we take on is documented from the first drawing to the final walkthrough.
Building a house is the one time every wall is open. That is when wiring is fast, clean and cheap, and when decisions about keypads, speakers, TVs, cameras and the network cost the least to make. Once drywall goes up, every change means cutting, patching and painting. A new construction smart home Monroe GA homeowners love is not about buying the newest gadgets. It is about putting the right infrastructure in the walls so the house can grow with you for twenty years. The best time to plan it is now, while the house is still on paper.
What to plan
These are the choices that shape every new construction smart home Monroe GA project we plan. Each one is easy on paper and expensive after the walls close. We walk through each one with you and your builder, then put the answers on the drawings so every trade can see them.
Where the rack lives, with power, ventilation and room to grow. Every cable in the house ends here. It needs cooling and quiet.
Access point locations on the ceiling plan and network cable to every TV, office and camera. Wi-Fi is designed, not guessed. It is a core part of any new construction smart home Monroe GA plan.
Centralized lighting or keypad locations decided with the electrician before boxes go in. This decision changes the electrical plan.
Speaker positions, TV locations, theater wiring and outdoor audio placed on the plans. Speakers are hard to move later. We plan it early in every new construction smart home Monroe GA design.
Shade pockets and power, camera sightlines, lock and gate wiring, and thermostat locations. Shade power is the most missed item. Thermostats need the right wire at the right height.
The difference that matters
Both put cable in the walls. Only one puts the right cable in the right place for the system you will actually use. A new construction smart home Monroe GA families enjoy depends on that plan more than on any device. Planning is where the money is saved. That gap is what we close on every new construction smart home Monroe GA project.
A few cable jacks and a basic network panel. No plan for speakers, keypads, cameras or shades. When you want them later, the walls come open.
Every device marked on the plans, home-run cable to each location, conduit for the future and a documented system. The house works on day one and grows without patching drywall.
How it gets built
Planning: we review your plans, meet with you and your builder, and mark every device on the drawings. Rough-in: after framing and before insulation, we pull labeled home-run cable, set wall boxes and run conduit where future changes are likely. Trim: near the end of the build, we install devices, program scenes and test each system. Handover: we walk your family through the house and leave documentation of what is in the walls. Each phase ends with a check against the plan.
We work on the builder schedule like any other trade, so technology never holds up the job. For a new construction smart home Monroe GA builders and owners can count on, showing up when scheduled matters as much as the work itself. The timing of each phase follows your build, so we plan our visits around the builder schedule from the start.
Working with your builder
Sterling is the home integration trade on a new build, alongside electrical, plumbing and HVAC. We coordinate box locations with the electrician, shade pockets with the framer and equipment room cooling with the HVAC contractor. Builders such as Nehemiah Construction bring us in at framing. If your builder works with a different low-voltage company, we are happy to coordinate. See our builder partnerships page. Coordinating early is what keeps a new construction smart home Monroe GA project on time and on budget. We also attend the pre-drywall walk so the builder and homeowner can see every box and cable before insulation goes in.
Future proof
Not every system has to be installed on day one. We can wire for shades, a theater or more cameras now and install them later, so the upgrade is a weekend instead of a renovation. Spare conduit to key locations keeps options open as technology changes. Many new construction smart home Monroe GA owners choose this path so the full plan is in the walls while the budget catches up. A common example is wiring every large window for shades even if only a few rooms get them at first. The same goes for outdoor speakers, extra cameras and a future theater in the bonus room.
Why it matters here
New custom homes around Monroe, Good Hope, Loganville and Madison are often on larger lots with long driveways, detached garages and outdoor living spaces. A new construction smart home Monroe GA families build here needs wiring and network planned for the whole property, not just the house footprint. Outbuildings, gates and pool areas need cable and conduit planned before the site work, not after. We also look at where the internet service enters the property, because the provider connection has to reach the equipment room cleanly. Every one of those details is easier to handle while the site is still open.
Planning also has to account for Georgia weather. We plan surge protection, battery backup and outdoor-rated equipment from the start, and we route outdoor cable in conduit before landscaping and hardscape go in. A new construction smart home Monroe GA project done this way handles a summer storm without anyone noticing. Equipment rooms also get dedicated circuits and space for battery backup.
Options compared
Full system at move-in (our standard for custom homes). Everything planned, wired, installed and programmed before you move in, so the house works from the first night. You get a full walkthrough and documentation before the moving truck arrives.
Wire now, add later. Infrastructure for every system goes in during the build, with some devices installed later as budget allows. A smart way to phase a project. Wire is cheap compared to the drywall, paint and trim work needed to add it after move-in. Many new construction smart home Monroe GA clients start here.
Builder standard prewire only. A few cable outlets and a basic network. Often leaves no wire where you later want speakers, cameras or keypads, which means opening walls after move-in. Upgrading from a builder prewire later almost always costs more than planning it right the first time.
Budget
Every house is different, so we do not publish one price. As a typical 2026 guide, not a quote, focused projects such as a network, cameras and a few rooms of lighting and audio often start in the low five figures. Whole-home systems for custom homes commonly range from about $40,000 to well over $150,000. We price the infrastructure and the devices separately, so you can see what wiring for the future costs on its own.
The number of rooms and systems, motorized shades, a dedicated theater and outdoor coverage drive the price most. We price each system separately so you can decide what to install now and what to wire for later.
Planning a new construction smart home Monroe GA project at blueprint costs less than adding the same system later, because wiring open walls is far faster than fishing cable through finished ones. Even modest budgets go further when the wiring plan is done right the first time.
Prewire checklist
Network cable to every TV, office, access point and camera. Speaker wire to ceiling and outdoor speakers. Keypad and touchscreen wall boxes. Shade power at every window that might get shades. Gate and garage wiring. Conduit from the equipment room to the attic and crawl space. Low-voltage boxes at every keypad, thermostat and touchscreen location, set at the same height as nearby switches.
Every run is labeled at both ends and recorded in a drawing you keep. That record makes service, upgrades and resale easier for the life of the house. Your new construction smart home Monroe GA drawing becomes part of the house records, like the electrical and plumbing plans. We also photograph open walls before drywall, so the exact location of every cable and box is on record if anyone ever needs to find it.
Choosing an integrator
Ask when they want to be involved, who will attend site meetings, how wiring is labeled and documented, and who programs and supports the system after move-in. Ask whether they are an authorized dealer for the platform they install. CEDIA publishes useful guides for homeowners planning technology in a new build. Ask to see a sample wiring drawing from a past project, with names removed.
Also ask how they handle plan changes during construction, because they always happen. A good integrator keeps the technology plan updated as the design changes, and tells you what each change costs before it happens. You should get a clear scope in writing that lists every room, every device location and what is included at each phase of the build.
Service area
We plan and prewire new homes across Monroe, Loganville, Good Hope, Winder, Madison, Watkinsville, Athens and Lake Oconee. Our office is at 511 E Spring St in Monroe, open Monday to Friday, 8 AM to 5 PM. We also work with Nehemiah Construction and other custom builders across the area.
Wherever you are building, a new construction smart home Monroe GA project starts with your plans and one conversation. Homeowners building on acreage or at the lake get the same planning and the same team. If you are early in design, we can also meet with your architect to review the plans before they are final. Call us to talk through your new construction smart home Monroe GA plans.
For builders
Builders get a single contact for low voltage, a clear scope, labeled wiring and a clean handoff. We show up when scheduled and leave the job ready for the next trade. See our low voltage contractor page for builder scope. We share a scope, a schedule and a contact so the superintendent always knows where we are.
Homeowners get a house that works, and builders get one less thing to manage. Many new construction smart home Monroe GA projects come to us through builders who want a reliable technology trade. Builders also get a technology partner who can answer buyer questions during design meetings and help explain options in plain language. It is one more reason a new construction smart home Monroe GA system should be planned by the team that supports it.
Why Sterling
We are one team from planning to service. The people who plan your new construction smart home Monroe GA project are the people who wire it, program it and come back when something needs attention. We are a Control4 dealer, we work alongside custom builders, and we document everything. Start a conversation while your plans are still on paper. We would rather spend an extra hour on the plans than an extra day cutting drywall. When the build is done, we stay on as your service team for the life of the house.
Common questions
As early as possible, ideally while plans are being drawn. A new construction smart home Monroe GA project goes best when devices are on the drawings before framing. Even after framing, there is still time to plan well, as long as it happens before insulation and drywall.
As a typical 2026 guide, not a quote, focused projects often start in the low five figures and whole-home systems for custom homes commonly range from about $40,000 to well over $150,000. A look at your plans is enough for a real number.
Network cable to TVs, offices, access points and cameras, speaker wire, keypad and touchscreen boxes, shade power, gate and garage wiring, and conduit for future changes. Each item is placed on the plans, so nothing is forgotten when the walls close.
Yes. Many families wire for the full plan and install some systems after move-in, so later upgrades do not mean opening walls. It is one of the most common ways we build a new construction smart home Monroe GA families can grow into.
Yes. We work on the builder schedule as a technology trade and coordinate with the electrician, framer and HVAC contractor. We share the schedule with your builder early.
Usually not for an integrated home. Standard prewire rarely includes speakers, keypads, cameras, shades or a planned network. We can review your builder package and tell you what to add.
We are a Control4 dealer. Typical systems include Lutron lighting and shades, UniFi networking, Sonos audio, Sony video, Ecobee or Honeywell climate, and integrated cameras and locks. We only install products we can stand behind and support.
It follows the build: planning early, rough-in after framing, and trim near the end, with programming and handover before move-in. We share our schedule with your builder at the start.
Yes. Every run is labeled and recorded on a drawing you keep. The drawing helps every future service visit and every future owner.
When it helps, yes. We attend key meetings so technology decisions stay on schedule. We keep the technology plan updated as the design changes.
Yes. We stay your service team for updates, changes and repairs. The team that wired your new construction smart home Monroe GA project is the team that supports it.
Monroe, Loganville, Good Hope, Winder, Madison, Watkinsville, Athens and Lake Oconee. We also plan new lake homes and second homes in the region.
Also in home integration
Start a conversation
